Products | Technologies | Support | Press | Reviews | Where To Buy
Home - Products






Noctua - Button
Noctua - Button
Noctua - Button
Noctua - Button
Noctua - Button
Noctua - Button
Noctua - Button
  Bjorn3d.com Review
  Pro-Clockers.com Review
  techPowerUp! Review
  Hardware.no Review
  VerdisReviews.com Review
  show all reviews of this product (136)

Noctua - Bild

Noctua's NT-H1 is a pro-grade TIM solution for enthusiasts who demand both exceptional performance and maximum ease of use: A hybrid compound of different micro-particles allows for minimum thermal resistance, excellent ease of use and outstanding long-term stability.



NT-H1 Excellent performance
NT-H1 consists of a hybrid compound of different micro-particles, which has been specifically optimized for use in PC environments. Thanks to its extremely low thermal resistance as well as excellent pliability and spreadability, NT-H1 achieves outstanding results.

NT-H1 Maximum ease of use & efficient dosage
As NT-H1 spreads very well under pressure, there's no need to smear it over the heat-spreader. This reduces both the consumption of paste and the time spent on the installation process: Put one drop of NT-H1 onto the centre of your CPU, install the cooler and that's it!

NT-H1 Top-performance right from the start
NT-H1 reaches its full performance extremely fast and doesn't require a longer "burn-in" time.

NT-H1 Excellent long-term stability
NT-H1 doesn't contain any solvents or other substances with low flash point and provides excellent long-term stability. Due to the compound's exceptional curing, bleeding, dry-out und thermal cycling characteristics, NT-H1 can be used for several years without any problems.

NT-H1 Not electrically conductive, non-corroding
NT-H1 possesses a very low dielectric constant and a high dielectric strength. Therefore, there's no danger of short-circuits even in case of direct contact with components or conducting paths. Fully compatible with all materials commonly employed in PC environments, NT-H1 is suited for use with aluminium and copper coolers.

NT-H1 Suitable for compressor cooling
NT-H1 is perfectly suited for use with compressor coolers. Even at the very lowest temperatures, the paste delivers full performance and remains easy to clean off.




Noctua
18.12.2014 - hardwarepoint.net NH-U14S
Test verdict: "Der NH-U14S ist noch leistungsfähiger als der ohnehin schon gut abschneidende Dark Rock 3 und hält somit die CPU noch kühler. Hinzu kommt das bessere Montagesystem, was am Ende auch einen teureren Einkaufspreis nach sich zieht." (Dennis Heinze, hardwarepoint.net)
Submit

18.12.2014 - Donanimhaber Forum NH-U9S
Test verdict: "Uzun lafın kısası ufak form faktörde bir bilgisayar topluyorsanız ve size ram,ekran kartı, kasa uyumuyla sıkıntı yaşatmayacak bir hava soğutma çözümü arıyorsanız NH-U9S ye bakmanızı mutlaka tavsiye ederim. Zira şu an piyasada pek alternatifi ortada gözükmüyor. Altı sene garantide cabası." (Ali Emre Alıcı, Donanimhaber Forum)
Submit

17.12.2014 - HT4U.net NH-U9S
Test verdict: "Noctuas jüngste Sprösslinge glänzen mit den üblichen Werten des Herstellers. Hervorragende Verarbeitung und Kompatibilität, einem wirklich tollen Montagesystem, bei welchem sich so mancher Anbieter eine Scheibe abschneiden könnte und einer guten Leistungsfähigkeit." (Peter Gräber, HT4U.net)
Submit

17.12.2014 - PC-Max.de NH-U9S
Test verdict: "Auch wenn es sich bei den beiden neuen Kühlern von Noctua um keine Modelle mit brachialer Cooling-Performance handelt, liegen die verzeichneten Temperaturen in einem Bereich, der einige deutlich ausladendere Konkurrenten überflügelt. Zudem muss sich vor Augen geführt werden, in welchen Einsatzgebieten die Verwendung eines derart kompakten CPU-Coolers sinnvoll ist. Die kleinen Würfel machen aufgrund ihrer großen Kompatibilität mit umliegenden Bauteilen des Systems und der besonders im Falle des NH-D9L geringen Bauhöhe vor allem in kompakten Systemen viel her." (William Zwingenberger, PC-Max.de)
Submit