Products | Technologies | Support | Press | Reviews | Where To Buy
Home - Products






Noctua - Button
Noctua - Button
Noctua - Button
Noctua - Button
Noctua - Button
Noctua - Button
Noctua - Button
  Bjorn3d.com Review
  Pro-Clockers.com Review
  techPowerUp! Review
  Hardware.no Review
  VerdisReviews.com Review
  show all reviews of this product (138)

Noctua - Bild

Noctua's NT-H1 is a pro-grade TIM solution for enthusiasts who demand both exceptional performance and maximum ease of use: A hybrid compound of different micro-particles allows for minimum thermal resistance, excellent ease of use and outstanding long-term stability.



NT-H1 Excellent performance
NT-H1 consists of a hybrid compound of different micro-particles, which has been specifically optimized for use in PC environments. Thanks to its extremely low thermal resistance as well as excellent pliability and spreadability, NT-H1 achieves outstanding results.

NT-H1 Maximum ease of use & efficient dosage
As NT-H1 spreads very well under pressure, there's no need to smear it over the heat-spreader. This reduces both the consumption of paste and the time spent on the installation process: Put one drop of NT-H1 onto the centre of your CPU, install the cooler and that's it!

NT-H1 Top-performance right from the start
NT-H1 reaches its full performance extremely fast and doesn't require a longer "burn-in" time.

NT-H1 Excellent long-term stability
NT-H1 doesn't contain any solvents or other substances with low flash point and provides excellent long-term stability. Due to the compound's exceptional curing, bleeding, dry-out und thermal cycling characteristics, NT-H1 can be used for several years without any problems.

NT-H1 Not electrically conductive, non-corroding
NT-H1 possesses a very low dielectric constant and a high dielectric strength. Therefore, there's no danger of short-circuits even in case of direct contact with components or conducting paths. Fully compatible with all materials commonly employed in PC environments, NT-H1 is suited for use with aluminium and copper coolers.

NT-H1 Suitable for compressor cooling
NT-H1 is perfectly suited for use with compressor coolers. Even at the very lowest temperatures, the paste delivers full performance and remains easy to clean off.




Noctua
20.04.2015 - Insomnia.gr NH-U9S
Test verdict: "Κάπου εδώ φτάνει στο τέλος της και η σημερινή μας παρουσίαση και η ψύκτρα που δοκιμάσαμε αυτή τη φορά, κατεβαίνει από τον πάγκο δοκιμών αφήνοντάς μας εξίσου θετικές εντυπώσεις με τη D9L. Διατηρώντας τις καλές επιδόσεις για την κατηγορία στην οποία απευθύνεται αλλά και έχοντας για μια ακόμη φορά ως βασικό "όπλο" την εντυπωσιακά αθόρυβη λειτουργία, η Noctua καταφέρνει να προσφέρει άλλη μια ποιοτική λύση αν και σε αρκετά αλμυρή τιμή." (Ζαννής Σκουλάξινος, Insomnia.gr)
Submit

20.04.2015 - Overclockers.com.ua NH-L9x65
Test verdict: "Самым главным достоинством Noctua NH-L9x65 являются его компактные габариты, в особенности, если речь идет о системах на базе процессоров Intel. И, само собой, — хороший вентилятор, высокое качество изготовления, простота установки и богатый комплект поставки." (Vasilenko Andrey, Overclockers.com.ua)
Submit

20.04.2015 - HardwareBBQ.com NH-L9x65
Test verdict: "Noctua NH-L9x65 works very nicely with low TDP processor. Itís a low-profile CPU cooler thatís not bigger than 95x95mm footprint. Exactly as advertised." (Roshan Ashraf Shaikh, HardwareBBQ.com)
Submit