If your case supports 360 or 420mm radiators and you want to achieve the best possible performance-to-noise efficiency, we highly recommend choosing the NL-LC1-36 (360mm) or NL-LC1-42 (420mm). Due to their larger radiators and triple fan configuration, these models can achieve significantly better results than the 240mm size NL-LC1-24.
In our tests using a 200W heat-load, the NL-LC1-42 and NL-LC1-36 ran around 4-6dB(A) quieter than the NL-LC1-24 while maintaining the same CPU temperature. The NL-LC1-24, however, has its place in more compact builds that cannot fit larger radiators or if cost is a concern.
When it comes to deciding between 420 and 360mm, there is a bit more to it than just “bigger is better”: While the 120mm NF-A12x25 G2 fans used on the NL-LC1-24 and NL-LC1-36 top out at 22.5dB(A) individually, the NF-A14x25 G2 140mm fans used on the NL-LC1-42 can go up to 24.8dB(A), which gives it a bit more performance headroom.
In practice, this means that the NL-LC1-42 can surpass the cooling performance of the NL-LC1-36 at higher fan speeds where it can leverage the full power of its NF-A14x25 G2 fans. Due to the higher airflow levels and the turbulence caused by the radiator, this performance benefit comes at the expense of up to ~5dB(A) higher noise levels. On the flipside, the NL-LC1-36 provides slightly better results at low fan speeds. This is due to the fact that the 120mm NF-A12x25 G2 fans have a higher blade coverage ratio than the 140mm NF-A14x25 G2 fans, which makes them more efficient working against high backpressure at low RPM.
Another thing to keep in mind is that the thermal performance advantage of the NL-LC1-42 at full fan speed becomes more pronounced with higher heat-loads: While we have measured around 1.2°C lower temperatures at 200W, the lead grew all the way to 3.8°C at 300W. At the same time, the NL-LC1-36 and NL-LC1-42 remained neck-and-neck in noise-normalised tests at ~22dB(A), where even at 300W heat load, the advantage of the 420mm radiator remained small at only 0.5°C:
Therefore, the heat-load alone should not dictate your buying decision: Even at 300W, the NL-LC1-36 will hold its ground when compared at equal noise levels, but the higher the heat-load, the bigger the performance headroom that the NL-LC1-42 can achieve at full fan speeds (at the expense of higher noise levels).
In summary, the NL-LC1-36 will provide optimal results in most use cases, and it even has a slight edge over the larger NL-LC1-42 in performance-to-noise efficiency at low fan speeds. This means that if your goal is to go as quiet as possible, we recommend going with the NL-LC1-36. If, by contrast, you simply want the maximum possible performance headroom or achieve the highest possible cooling performance at the expense of slightly higher noise levels at 100% fan speed, go with the NL-LC1-42 – just make sure that your case can fit 420mm radiators!
Further resources
Want to know more on this topic? Explore relevant articles and resources.
NL-PNA1 pump noise absorber: Tuned mass damper and acoustic soundproofing
The NL-LC1 series is the world’s first all-in-one liquid cooler to feature an integrated pump noise absorber that leverages acoustic soundproofing and the tuned-mass damper effect.
How our SecuFirm2+™ mounting system enables NL-LC1 coolers to achieve lower temperatures
Our SecuFirm2+™ mounting system ensures optimal force transfer and contact pressure, which can give the NL-LC1 a slight edge over other Emma V2 based coolers.
NL-LC1 series AIO coolers’ pump speed profiles explained
The NL-LC1 series’ pump comes with an integrated mode switch that makes it possible to choose between three settings (Quiet, Balanced and Manual).
Asetek Emma V2: State-of-the-art closed-loop liquid cooling
The Asetek Emma V2 represents the pinnacle of Asetek's evolution over the last two decades at the forefront of all-in-one liquid cooling.
Air cooling or water cooling, which one to choose?
Both air coolers and all-in-one liquid coolers have their respective advantages and disadvantages. We have summed them up for you in this guide to help with your buying decision.
Where should I install my AIO radiator (top vs. front/side)?
Many modern tower-style PC cases allow liquid coolers to be installed in more than one position (top, front or side of the case). This article explains their pro's and con's.
Should I use the NL-ACF1 auxiliary cooling fan?
The NL-ACF1 is an optional auxiliary cooling fan for NL-LC1 liquid coolers that provides extra airflow to near-socket compontents such as VRMs, M.2 SSDs or RAM.
How should I set up my NL-LC1 radiator fans (push, pull or push-pull)?
Whether you've just purchased or are about to purchase our NL-LC1 radiator, you're probably wondering how to position the fans in your build for the best results...
Related articles
Want to know more on this topic? Explore relevant articles and resources.
NSPR: Noctua Standardised Performance Rating
Noctua’s Standardised Performance Rating (NSPR) is a platform-independent classification system that allows customers to compare the efficiency of Noctua CPU coolers at a glance.
The Fractal Design Ridge and the story of “less is more“
05/05/2026
Discover the best Noctua CPU cooler and GPU setup for the Fractal Design Ridge case. See how a custom duct and removing extra case fans unlocks SFF performance.
NH-D15 G2 vs. NH-D15 performance data
With an NSPR (Noctua’s Standardised Performance Rating) score of 228, the NH-D15 G2 sets a new performance benchmark. But how does it compare to it's predecessor?
Offset AM5 mounting: technical backgrounds
Noctua’s AM5 offset mounting bars shift heatsinks to the south side of the AM5 socket. But why is this necessary, and how much does it improve cooling performance?